Solid Steel Industries - Steering Stabilizer

The DSS steering stabilizer will greatly reduce steering wander on your late model Dodge pickup.

This unit will serve to eliminate sector shaft play in the steering box which is a large contributor to wandering and poor road feel. This brace is designed to prevent failure of the steering gear on Dodge trucks. The brace supports the sector shaft in the steering gear eliminating the side play that creates premature failure and steering that seems to wander driving down the road. The brace also ties the frame horns together to help prevent frame flex. This Solid Steel Industries – Steering Stabilizer is an extremely strong brace constructed with a heavy wall square stock for additional support. The Solid Steel DSS will not flex and twist like the other lower priced braces available.

Installation is quick and easy. Most individuals can install Solid Steel Industries – Steering Stabilizer in approximately 30-45 minutes.It also serves to minimize frame flex at the steering box mounting point.

First check all your steering components. Loose ball joints, tie-rod ends or trackbar obviously must be replaced.

Poor wheel alignment must also be corrected. A steering box that has a loose sector shaft is often an overlooked cause of poor steering.

Features of Solid Steel Steering Stabilizer:

• Straight bolt-on installation. No drilling or welding.
• All mounting hardware is supplied.
• Durable powder-coated finish.
• NTN bearing is easily replaced if necessary.
• Compatible with most lift kits. There are some exceptions, however. If your lift kit has drop brackets for the anti-sway bar AND there is a tube between these brackets, then there will be interference.

Fits the Following Dodge RAM Trucks:

• DSS00203-4 fits Dodge RAM 03-08, Dodge RAM 2500, and Dodge RAM 3500 4x4
• DSS0019402-4 fits 94-02 Dodge RAM 2500 and Dodge RAM 3500 4x4, 1994 to 2001 RAM 1500 4x4
• DSS0019402-2 fits 94-02 Dodge Ram 2500 and 3500 4x2 and 1994 to 2001 1500 4x2.